EdgeRacer D - deburring and edge rounding both sides
Finally no more sharp edges - deburring on both sides in one pass
Deburring on both sides in just one pass – of course with 100% reproducible results and precise machining of the inner edges and outer edges – only the EdgeRacer 1500 D offers you that.
Best results in only one pass
The double-sided deburring machine EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to plane sheets, sheets with beads, notches, threaded holes and the like can also be processed. The maximum component height is 102 mm. The infeed of the brushes working from above and from below can be adjusted independently of each other.
Deburring and rounding of thin sheets and 3D workpieces
Deburr fine sheets or sheets with cut-outs. The grinding brushes can be advanced to above transport level so that the complete workpiece edge is processed. The oxide disc can be used to remove oxide layers on the inner edges and outer edges.
Key features
- Working width 1,500 mm
- Double-sided deburring in a single pass
- Gentle on surfaces, even on polished, brushed and foiled sheets
- User definable edge rounding
- Adjustment of the brushes also below transport height
Technical data
| EdgeRacer 1500 D | |
|---|---|
|
Working width |
1,500 mm |
|
Conveying speed |
0.4 – 4.0 m/min |
|
Part length |
≥ 345 mm (shorter on pallets) |
|
Part height |
≤ 102 mm |
|
Part weight |
≤ 80 kg/m² |
|
Insertion height |
950 mm + 50 mm |
|
Space requirement (W x L x H) |
2,600 x 2,300 x 2,500 mm |
|
Weight |
approx. 4,000 kg |
|
Electrical connection |
3 x 400 V, 50 Hz, 6 kVA |
|
Extraction capacity |
≥ 5,000 m³/h |
|
Noise level |
≤ 65 dB |